用戶在考慮使用超聲波清洗機進行清洗時，在咨詢供應商時應盡量提供以下內容，以便供應商快速、準確地為您推薦合適型號的機器。

When users consider using ultrasonic cleaning machine for cleaning, they should try to provide the following contents when consulting the supplier, so that the supplier can quickly and accurately recommend the appropriate model of machine for you.

工件材質、特性、尺寸、產品用途：材質主要分為金屬、玻璃、塑料等，特性主要是為了避免一些不適合使用超聲波或相應清洗液的場合，并且提供尺寸有利于確認機器的內膽和功率，產品的使用說明可以讓供應商根據以往的經驗快速提供相同或相似用途的產品工藝和解決方案；

Workpiece material, characteristics, size and product use: the material is mainly divided into metal, glass, plastic, etc. the characteristics are mainly to avoid some occasions that are not suitable for using ultrasonic or corresponding cleaning fluid, and the size is helpful to confirm the inner tank and power of the machine. The use instructions of the product can enable the supplier to quickly provide product processes and solutions for the same or similar uses according to previous experience;

需要去除的材料成分和特性：如機加工用切削油和碎屑、拋光蠟或沖壓油的去除、光學鏡片的磨料等；

Material composition and characteristics to be removed: such as cutting oil and debris for machining, removal of polishing wax or stamping oil, abrasive of optical lens, etc;

洗滌劑的選擇，過往經驗：選擇水性洗滌劑工藝機或有機溶劑型機，并考慮其性能、生產安全等；

Selection of detergent, past experience: select water-based detergent process machine or organic solvent machine, and consider its performance, production safety, etc;

上下游工藝裝備的日產量和產能：用戶應根據現有產能規劃設計機器產能，不應根據五年、十年發展盲目提出過多產能要求計劃，因為大容量機器是在產能不飽和的情況下使用的。，其耗水量和能源消耗量較大，占地較大，相對設備投資也較高，導致其終生使用經濟性較差；

Daily output and capacity of upstream and downstream process equipment: users should plan and design the machine capacity according to the existing capacity, and should not blindly put forward excessive capacity requirements according to the five-year and ten-year development, because large capacity machines are used under the condition of unsaturated capacity., Its water consumption and energy consumption are large, its land occupation is large, and its relative equipment investment is also high, resulting in poor lifelong use economy;

清洗工藝和烘干工藝的選擇：根據自己的使用經驗或同行的經驗，結合供應商提出的改進工藝方案；

Selection of cleaning process and drying process: according to their own use experience or peer experience, combined with the improved process scheme proposed by the supplier;

設備采購成本核算和全壽命周期成本核算。生命周期成本核算應重點考慮電耗、水耗、耗材和維護成本。即使機器采用相同的工藝設計，由于設計思路不同，也會導致上述成本核算的使用差異較大；

Equipment procurement cost accounting and life cycle cost accounting. Life cycle cost accounting should focus on power consumption, water consumption, consumables and maintenance costs. Even if the machine adopts the same process design, the use of the above cost accounting will vary greatly due to different design ideas;

廢物排放和環保問題：部分出口型企業還應考慮產品出口目的地地區的政策限制和規定；

Waste discharge and environmental protection: some export-oriented enterprises should also consider the policy restrictions and regulations of the product export destination area;

超聲波清洗機生產廠家提醒大家為了驗證工藝效果，下單前與供應商做一次以上的清洗實驗應該是必不可少的環節。更多相關內容大家可以來關注我們的網站www.glwh.com.cn！

The manufacturer of ultrasonic cleaning machine reminds you that in order to verify the process effect, it should be an essential link to do more than one cleaning experiment with professional suppliers before placing an order. You can pay more attention to our website!