很多剛剛買到全自動超聲波清洗機的客戶并不知道怎樣安裝，復雜的說明書讓人覺得很復雜。其實并不是特別難，掌握以下的方法即可。

Many customers who just bought the automatic ultrasonic cleaning machine do not know how to install it. The complicated instructions make people feel very complicated. In fact, it is not particularly difficult to master the following methods.

1、做好預備工作

1. Make preparations

全自動超聲波清洗機的零件整齊的擺放在平面上，一般超聲波換能器都是事先配對好的，所以要準備的只有鋼鐵、網墊、膠水等等。

The parts of the automatic ultrasonic cleaner are neatly placed on the plane. Generally, the ultrasonic transducers are matched in advance, so only steel, mesh pads, glue, etc. should be prepared.

2、噴砂清洗要細心

2. Be careful in sand blasting

先對準備好的零件進行金剛砂的噴砂，注意噴砂時要保證壓力大于等于6kg。然后進行零件的清洗，先用甲醇，然后再用丙酮，后要用水進行清潔備用。

Sand blast the prepared parts with carborundum, and ensure that the pressure is no less than 6kg. Then, clean the parts with methanol, acetone and water for standby.

3、其余工作要檢測

3. Other work shall be tested

清洗結束后要進行烘干預熱和膠接，膠接后要加壓處理，將鋼體放入無塵箱進行停止固化。后對超聲波機器進行檢測，符合規范的投入使用。

After cleaning, drying, preheating and bonding shall be carried out. After bonding, pressure shall be applied and the steel body shall be put into a dust-free box to stop curing. After that, the ultrasonic machine shall be tested and put into use if it meets the specifications.

此外超聲波清洗機在我們的日常生活中都占著十分重要的地位，所以我們都會害怕會發生故障，所以在平時的時候就應該注意一些日常的保養，才能夠確保它正常使用，比如：

In addition, the ultrasonic cleaner plays a very important role in our daily life, so we are afraid of failure. Therefore, we should pay attention to some daily maintenance at ordinary times to ensure its normal use, such as:

要保持設備工作場所的通風以及捷徑，這樣才能夠有利于超聲波清洗機的長期高效運轉以及工作環境的優化，定期清理清洗槽以及保持清凈槽內的整潔，這樣才能夠提高耐用性。

Keep the ventilation and shortcut of the equipment workplace, so as to facilitate the long-term efficient operation of the ultrasonic cleaner and the optimization of the working environment. Regularly clean the cleaning tank and keep the cleaning tank clean, so as to improve the durability.

定期測試設備的絕緣性能，對一些電器來說，畢竟都有接地線，所以，確保老化電器組件定期的檢查測試電源，確保符合電壓的要求，避免過高或過低的電源下長期工作。

Regularly test the insulation performance of equipment. After all, some electrical appliances have grounding wires. Therefore, ensure that the aging electrical components regularly check and test the power supply to ensure that they meet the voltage requirements and avoid long-term work under too high or too low power supply.

總而言之，全自動超聲波清洗機的安裝程序并不是復雜的，只要你有耐心就可以輕松的完成。更多相關的注意事項就來我們網站www.glwh.com.cn進行咨詢吧。

In a word, the installation procedure of the automatic ultrasonic cleaner is not complicated, as long as you have patience, you can easily complete it. For more information, please visit our website www.glwh.com.cn.